Riser

Ideal for dialing in fit on bikes with tall front ends, the 2x Flat bar can be mounted with positive or negative 5mm rise to achieve the ideal riding position. Constructed of HMF UD carbon, the 2x Flat bar is perfect for race-worthy weight savings on any XC rig. - Carbon monocoque construction - Rise: +/- 5mm - Width: 710mm - Not bar end compatible - Matte UD finish - 183g

Light and compliant for incredible durability and a supple, refined ride, the Ritchey WCS Carbon Rizer Handlebar is the choice for XC riders looking for a high-end carbon bar that's built for performance. The WCS Carbon Rizer features our proven WCS carbon technology, a textured stem clamp area to reduce risk of bar slippage, and is reinforced internally to accept bar ends and shifter/lever clamps. - Carbon monocoque - 30mm rise - 9 degree sweep - Width: 710 and 740mm (710mm USA only) - 31.8mm center section - Matte UD carbon finish - Weight: 180g

Light and compliant for incredible durability and a supple, refined ride, the Ritchey Rizer bar is the choice for XC riders looking for a high-end carbon bar that's built for performance. The WCS Carbon Rizer features our proven WCS carbon technology in a 15mm rise bar, a textured stem clamp area to reduce risk of bar slippage, and is reinforced internally to accept bar ends and shifter/lever clamps. - Carbon monocoque - 15mm rise - 9-degree sweep - Width: 740mm - 31.8mm center section - Matte UD carbon finish - Weight: 180g

Same proven Ritchey quality, performance, and materials now beefed up and available in trail-worthy widths. A shallow rise and gentle sweep are the key attributes of the WCS Trail Rizer bar. The extra-wide grip area allows plenty of room for all components and remotes of choice. - Material: carbon fiber - Width: 780mm - Rise: 15mm - Backsweep: 9° - Upsweep: 6° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 199g

The WCS Carbon Logic-E Rizer bar ties together Ritchey's historic mountain biking heritage with the demands of today's modern electronic drivetrains. Designed to accommodate the internal routing of Shimano EW-SD50 wires for either Shimano Di2 or STEPS systems, this bar is built to be light and compliant for incredible durability and a supple, refined ride. The WCS Carbon Logic-E Rizer is the choice for XC riders looking for a high-end carbon eMTB bar that's built for performance. The WCS Carbon Logic-E Rizer features Ritchey's proven WCS carbon technology in a 15mm-rise bar with a textured stem clamp area to reduce the risk of bar slippage. - Material: carbon fiber - Width: 780mm (cutting not recommended) - Rise: 15mm - Backsweep: 9° - Upsweep: 3° - Clamp diameter: 31.8mm - Bar-end compatible: no - Weight: 175g - Electronic compatibility: Shimano Di2 / STEPS (Shimano EW-SD50 cable—internal routing) - For proper assembly, stems with open faceplates are required, such as the Ritchey C220 Trail.

State-of-the-art SuperLogic construction where weight-to-performance superiority is the ultimate object. The SuperLogic Rizer bar is the best MTB handlebar for those looking for the lightest set up possible for their XC rig. - Carbon monocoque - 15mm rise - 9 degree sweep - Width: 710mm - 31.8mm center section - Not bar end compatible - Matte UD carbon finish - Weight: 145g

- Inspired by the classic V-Cross BMX bars from the 80's - Constructed from butted 4130 Cro-Mo - 820mm width, can be cut to 720mm if desired

Lightweight 6061 aluminum handlebar with extra backsweep makes it possible for kids to change position more quickly, to steer the bike more actively and to support the child in an ergonomic posture on the bike - Designed around smaller shoulder width and arm span of young riders

- World Cup DH proven double butted 7075-T6 aluminum bar - Designed with Downhill as well as All Mountain and Enduro riding in mind - 790mm width provides confidence for even the toughest trails

Double butted 7075-T6 aluminum bar, designed and tested by Reverse Team Rider Lukas Knopf - Inscribed with his mantra - life is short - stunt it - Includes cutting lines and stem alignment guide marks

- Initially designed and built for trials, it soon became apparent this handlebar can serve as a high-rise bar for almost any discipline - Due to its 76mm rise and pleasing 9-degree backsweep, this handlebar affords an upright position that is comfortable enough for leisure and daily commuters - High rise 7050-T6 aluminum bar

E-Element Riser Bar - 7050-T6 aluminum bar with special Element Butting Technology for E-Bike use - Lab tested by EFBE Pruftechnik in Germany, certified for safe use on E-Bikes under the toughest conditions - Includes cutting lines and stem alignment guide marks

Double butted 7075-T6 aluminum bar, designed and tested by Freeride legend Nico Vink - Designed for riders who value strength and reliability over light weight - Increased wall thickness to withstand the toughest abuse

Super light carbon bars incorporating years of World Cup racing experience, optimized for the most demanding cross-country riders Choose flat or shallow rise

- Reverse Components flagship handlebar reduces vibrations which can cause fatigue on longer runs over rough terrain\n- Carbon construction with Seismic vibration damping technology\n- Unique carbon laminate process makes a handlebar that is both lightweight and strong \n- Tested extensively at the EFBE laboratory in Germany, a pioneer in DIN 79100 test methods

The Renthal Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar. Designed and developed to offer the ultimate combination of lightness, strength and durability. - The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing - Exclusive Series 7 aluminum is heat treated to provide strength and durability - Shot peened to increase fatigue life and durability - Hard anodized to keep your handlebar looking new

The Renthal Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar. Designed and developed to offer the ultimate combination of lightness, strength and durability - The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing - Exclusive Series 7 aluminum is heat treated to provide strength and durability - Shot peened to increase fatigue life and durability - Hard anodized to keep your handlebar looking new

- The second version of the Fatbar has undergone a full structural re-design. - In keeping with the demand for wider, gravity oriented handlebars, the width increased to 800mm. - Proven high grade 7050 T6 aluminium and variable gauge taperwall construction

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

- V2 is now 760mm in lenght with updated graphics - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon is the product of an intense and in-depth research and development program - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption - Full uni-directional (UD) carbon construction with efficient orientation and placement of the fibers to maximize strength and fine tune stiffness - UD carbon fiber layup is specific to each model and rise

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings. - Uni-Directional carbon construction - Ride-tuned to provide an ideal combination of stiffness and shock absorption - Increased center section width for fine-tuned flex characteristics - Downhill and twin crown fork compatible - Permanent graphics, set-up grid and cut marks

- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar. - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid

- Manufactured from cold drawn, seamless 6061 material - Shot peened for increased fatigue life - Gradual external swaging & internal taper give increased strength & durability without adding weight - 710mm wide

Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward

The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°

A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°

Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. - Manufactured from cold drawn, seamless 6061 Aluminum - Shot peened for increased fatigue life - 35 optimized triple butted design

Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep

- Butted alloy tube, cold-drawn and shot-peened to increase fatigue resistance - Intended use: XC, Trail and All Mountain - Bar Clamp Diameter: 31.8 mm - Bend: 9 deg - Weight: 290 g

Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep

Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color

- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep; 3/4 Risers have a 4deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 20 mm - Bend: 8 deg - Weight: 175 g - Width: 725 mm

- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep

The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio

XC riding is changing – Bikes, trails and riders are all progressing and pushing boundaries. Our new Next SL bar was designed to reduce rider fatigue without compromising handling. This bar allows good vertical flex for comfort, while also eliminating bad horizontal flex to improve steering precision.

Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world. SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance. - SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight - Minimum bar width of 28" or 710mm at indicated cut marks - Reinforced clamping zones for lock-on grip - Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers

Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control

Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.

A25Y Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components

- 7050 ProTaper alloy optimizes strength while reducing weight - Cut mark graphics aid in customizing fit

A25 Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components

- Utilizes a pressure bladder layup process that provides consistent material thickness - Cut marks provide a range of width options from 810mm down to 550mm - Textured Grit Grip finish in clamp area helps to eliminate the possibility of over-tightening - Lifetime crash replacement policy

- Features PFL (Plastic Foam Lamination) manufacturing - PFL utilizes tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars - The process uses less excess resin and fewer plys, resulting in a 15% lighter bar

The award-winning vibration damping of One Up Components carbon handlebars now available in aluminum\n - Fine shot peened and anodized 7050-T76 aluminum alloy with glossy logos - Patented oval bar shape increases vertical compliance and combines the best characteristics of 31.8 & 35.0mm diameter handlebar standards - Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips - Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response - Third party online sales are strictly prohibited by manufacturer

ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let us ride harder for longer. The solution is our patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. Almost every other carbon bar on the market copies the simple tapered profile of an Aluminum bar. With carbon you can take advantage of more complex shapes to get a better performing product, so that's what we did. If you actually care about bar compliance, then you don't make a regular 35mm diameter bar. Sure you can try to "optimize" the flex slightly with layup, but geometry is king and you're fighting a losing battle. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We benchmarked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. SPECS - Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up - Weight: 20mm Rise (220g) 35mm Rise (225g) - Max Stem Clamp Width: 65mm - Max Control Torque: 5Nm - Minimum Trim width: 740mm - Colour: Black. Decal kits: Available in Red, Green, Blue, Orange, Purple & White COMPATIBILITY - Grips with only an outer clamp are not compatible with our bar.

- Internal routing for Shimano STEPS switch units and tested to the very demanding Zedler E-MTB Advanced Plus standard and the international DH standard (ASTM Cat. 5 Downhill) - Patented oval bar shape provides increased vertical compliance - Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips - Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response - Third party online sales are strictly prohibited by manufacturer

The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar. - 41-Thermal processed 4130 chromoly - Multi-butted

Odyssey Shortcut BMX Handlebar - Butted 20mm crossbar - 1.8/1.3mm thick, multi-butted main tubing - Large radius bends for greater durability - Post-weld heat-treated for added strength

A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability. - Multi-Butted, traditional 7/8" crossbar for strength - Large radius bends for greater durability - Welded end caps to reduce flex - Post-weld heat-treated for added strength

The BOSS bar is Aaron Ross’ signature bar that is multi-butted and 41-Thermal processed 4130 chromoly. - Aaron Ross signature - Proven 41-Thermal processed 4130 chromoly - Multi-Butted, traditional 7/8" crossbar for strength

The Super Highway bar is a mid-rise bar that comes with Odyssey's legendary 41-Thermal lifetime warranty. - 1.8/1.3mm thick, multi-butted main tubing - Butted, traditional 7/8? crossbar for strength - Large radius bends for greater durability - Post-weld heat-treated

Broc Raifrod's new signature BROC bar is built around the popular Odyssey Lumberjack XXL bar shape but uses a more narrow "pre-cut" 29" width and slightly less backsweep at 10 degrees. - 41-Thermal Lifetime Warranty - 1.8/1.3mm thick, multi-butted main tubing - Butted, traditional 7/8? crossbar for strength - Large radius bends for greater durability - Post-weld heat-treated

- Aluminum cruiser bar offers an upright, comfortable riding position - Rigid aluminum construction, compatible with MTB-style levers/shifters

- Narrow aluminum riser bar for urban use (not recommended for freestyle)

- Custom swaging process results in the ultimate strength-to-weight ratio - Wide 7075 bars with a 35mm clamp area, 5 degree upsweep and 8-degree backsweep - Features two-tone decals with easy-cut markings

Budget-friendly mountain bars with stylish flair. - Plain gauge, tapered and shot-peened AL6061/T6 - Shot-peened for surface hardness - 15mm rise - 9° backsweep, 4° upsweep - Bar Clamp Diameter: 31.8mm - Material: Alloy - Width: 740mm

Double butted, tapered, shot peened 6061 aluminum

- Double butted, tapered 6061 aluminum - Bead blasted anodized black

The SL-K Riser Bar is the ultimate mix of light weight and strength for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both worlds of carbon and aluminum. The carbon helps keep the vibration to a minimum, while the aluminum core maintains a majority of the strength. The SL-K handlebar is XC weight-matched with Enduro strength. With a solid 740mm width and 18mm rise, this bar will help with a perfect fit, great control, and peak performance for even the most demanding rider in mind. - UD carbon and AL6066 material - Carbon Structural Integration (CSI) - Textured stem clamp zone - 18mm rise - 9° backsweep, 4° upsweep - UD carbon finish